If in doubt, never operate or handle the CRI, see Post Sale.
Telephone: 0800-152577 / E-mail: [email protected]
During harrowing (with the discs on the ground), DO NOT maneuver to the right, as
the angles formed by the disc sections will transmit great effort to the equipment,
especially the traction components.
09
-
Remove pieces of wood or any other object that may be attached to the discs.
10 -
In compacted areas where the penetration of the discs is difficult, depth can be
minimal, making work unsatisfactory. In these cases, applying other more suitable
products is recommended.
11 -
During work or transport, the tractor's drawbar must remain fixed.
12 -
When performing any maintenance on the
CRI
, lower it to the ground and switch off
the engine.
13 -
The
CRI
has several settings, but only local conditions can determine the best
setting.
With the disc sections in the ground, it is necessary to make
maneuvers to the left (closed side of the CRI) avoiding overloads.
ATTENTION
Instruction Manual
Summary of Contents for CRI
