49
Parameter Name
Description
tReselectionEutraHigh
This value is part of the calculation related to the
TreselectionEUTRA speed-dependent scaling factor. When a
neighbor cell is ranked as better than the serving cell, based
on RSRP, for a certain period of time (tReselectionEutra) the
UE in high mobility state will be handed off to the neighbor
cell.
Reselection Thresh High
The reselection threshold for higher priority inter-band
frequencies. This parameter represents the access threshold
level at which a UE will leave the serving cell and reselect
another cell at the target frequency, given that the target
frequency cell has a cell reselection priority higher than the
serving one.
Range: 0 to 31
RsSelection Thresh Low
The reselection threshold for lower priority inter-band
frequencies. This parameter represents the access threshold
level at which a UE will leave the serving cell and reselect
another cell at the target frequency, given that the target
frequency cell has an absolute priority lower than the serving
one.
Range: 0 to 31
Reselection Priority
Priority of the reselection to cells at this frequency.
Range: 0 to 7
qQualMinR9
The maximum uplink transmitted power that UEs are
allowed. The parameter is used to limit the transmitted
power in the cell.
Range: -1 or -34 to -3
threshxHighqR9
High RSRQ threshold of priority reselection.
Range: 0 to 31
threshxLowqR9
Low RSRQ threshold of priority reselection.
Range: 0 to 31
csgPhyCellIdStart
The starting value of PCI used for Closed Subscriber Group
(CSG) close mode.
Range: 0 to 503
csgPhyCellIdRange
The number of PCIs used for CSG close mode
multibandInfoList
The list of multi frequencies, used to identify that a frequency
point belongs to multi bands.
Range: 0-2^32
openPhyCellStart
The starting value of PCI used for CSG open mode.
Range: 0 to 503
openPhyCellRange
The number of PCIs used for CSG open mode
hybridPhyCellIdStart
The starting value of PCI used for CSG hybrid mode.
Range: 0 to 503
hybridPhyCellIdList
The number of PCIs used for CSG hybrid mode
Summary of Contents for Neutrino-224
Page 1: ...Neutrino 224 Indoor 2x125mW FDD TDD eNodeB Installation Guide December 2018 Version 1 7...
Page 20: ...20 Figure 4 7 FDD eNB GUI Home Page Figure 4 8 TDD eNB GUI Home Page...
Page 47: ...47 Figure 5 24 LTE Neigh Freq Settings 1 of 2 Figure 5 25 LTE Neigh Freq Settings 2 of 2...
Page 64: ...64 Figure 5 38 Cell ReSelection Parameter Figure 5 39 Additional Measurement Parameter...