29
Figure 5-8: Host
Table 5-6: Host
Parameter Name
Description
Host Name
Host server name. Range: 0-63 digits.
Time Zone
Located time zone of the host server.
Range: -12 to 12.
dnsOnBoot
Enable or disable Domain Name Server (DNS) function.
DNS Address
For DNS 1 – 8:
Enable or disable the DNS server (#). If enabled, enter the IP
address for the host server.
Note: If it is an IPv6 address, select the check box.
5.2.5
IPSec
In the presence of an IP Security (IPSec) gateway, the security protocols are provided in the
network layer to ensure the safety of transmissions. The system enables the IPSec function by
default and supports the configuration of one IPSec tunnel. Operators can modify the IPSec
server configuration based on their specific requirements. Follow the steps in this section to
configure IPSec.
1.
Go to Network > IPSec to enter the
IPSec
configuration page, as shown in Figure 5-9.
Summary of Contents for Neutrino-224
Page 1: ...Neutrino 224 Indoor 2x125mW FDD TDD eNodeB Installation Guide December 2018 Version 1 7...
Page 20: ...20 Figure 4 7 FDD eNB GUI Home Page Figure 4 8 TDD eNB GUI Home Page...
Page 47: ...47 Figure 5 24 LTE Neigh Freq Settings 1 of 2 Figure 5 25 LTE Neigh Freq Settings 2 of 2...
Page 64: ...64 Figure 5 38 Cell ReSelection Parameter Figure 5 39 Additional Measurement Parameter...
