Baicells Neutrino-224, Installation Manual

Page: 61 / 86

61
Qhyst Compensation for the serving cell in the reselection
evaluation. See parameter Q
hyst
in 3GPP 36.304.
Range: 0-6, 8,10,12,14,16,18,20,22,24 dB
Default: 3 dB
Allowed Meas BW Measurement bandwidth allowed.
Options: Null, 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz, or 20
MHz
Default: 20 MHz
Additional Measurement Parameter (Figure 5-39):
mobilityType
Designated mobility type of the UE’s consequent action after
the measurement event reporting.
Options:

Blind_redirect

Irat_data

Irat_voice
measEvent Defines the event type of measurement report.
Options:

EVENT_A2

EVENT_B2 - only mapping to Irat_voice
eutranThresholdRsrp RSRP threshold to be used in EUTRA measurement report
triggering condition for events A2 and A5.
Range: 0 to 97
eutranThresholdRsrq RSRQ threshold to be used in EUTRA measurement report
triggering condition for events A2 and A5.
Range: 0 to 34
Hysteresis Hysteresis value applied to entry and leave condition of a
report triggering event. The actual value will be the configured
value x 0.5. Refer to 3GPP 36.331 6.3.5.
Range: 0 to 30
Time To Trigger Concerns the time during which specific criteria for the event
need to be met in order to trigger a measurement report.
Refer to 3GPP 36.331 6.3.5.
Options: 0, 40, 64, 80, 100, 128, 160, 256, 320, 480, 512, 640,
1024, 1280, 2560, 5120 ms
Default: 0 ms
eutranTriggerQuantity The quantities used to evaluate the triggering condition for
the event for the .Reference Signal Received Power (RSRP) and
Reference Signal Received Quality (RSRQ) value, as specified in
3GPP 36.331 6.3.5.
Options:

RSRP

RSRQ
A2reportQuantity Measurement quantities to be included in the A2
measurement report.