72
Figure 5-43: MOCN Parameters (1 of 2)
Figure 5-44: MOCN Parameters (2 of 2)
Table 5-28: MOCN Parameters
Parameter Name
Description
PLMN
PLMN assigned by the operator. Must be a 5- or 6-digit
number.
cellReservedForOperatorUse
Indicate whether or not the cell is reserved for this
operator.
dedicatedPlmnUserResources The available user resources.
Range: 0-32
dedicatedPlmnBearerResources The available bearer resources.
Range: 0-256
5.5.2.2
RRC Parameter
The Radio Resource Control (RRC) protocol is used to control communications between
the UE and eNB. Use the
RRC Parameter
menu to configure the bearer QoS control
parameters of every QCI level. Refer to Figures 5-45 and 5-46, and to Table 5-29 for a
description of the
RRC Parameter
fields.
Click on the
+
Add icon in the upper side side of the window to enter the parameters.
Select
Save
to retain the configuration.
Summary of Contents for Neutrino-224
Page 1: ...Neutrino 224 Indoor 2x125mW FDD TDD eNodeB Installation Guide December 2018 Version 1 7...
Page 20: ...20 Figure 4 7 FDD eNB GUI Home Page Figure 4 8 TDD eNB GUI Home Page...
Page 47: ...47 Figure 5 24 LTE Neigh Freq Settings 1 of 2 Figure 5 25 LTE Neigh Freq Settings 2 of 2...
Page 64: ...64 Figure 5 38 Cell ReSelection Parameter Figure 5 39 Additional Measurement Parameter...
