30
Figure 5-9: IPSec
2.
In the
IPSec Setting
area of the window, check that the IPSec function is set to
Enabled
(default). If the
Enable
field is set to
Disabled
, select
Enable
to enable the IPSec
function. Click on
Save
to save the IPSec setting.
3.
If you wish to enable soft USIM, meaning users can use embedded rather than
removable SIM cards, check that the default value of Enabled is selected in the
softUsim
field.
4.
Click on Save to retain the IPSec configuration settings.
5.
Under IPSec Tunnel List, click on the display icon
under
Operate
to display the
tunnel configuration page. Configure the
Basic Setting
parameters shown in Figure 5-
10 and described in Table 5-7. Select
Save
to save the changes.
Summary of Contents for Neutrino-224
Page 1: ...Neutrino 224 Indoor 2x125mW FDD TDD eNodeB Installation Guide December 2018 Version 1 7...
Page 20: ...20 Figure 4 7 FDD eNB GUI Home Page Figure 4 8 TDD eNB GUI Home Page...
Page 47: ...47 Figure 5 24 LTE Neigh Freq Settings 1 of 2 Figure 5 25 LTE Neigh Freq Settings 2 of 2...
Page 64: ...64 Figure 5 38 Cell ReSelection Parameter Figure 5 39 Additional Measurement Parameter...
