26
Figure 5-5: LAN
2.
The LAN interface is enabled by default. If the
IP address
and
Subnet mask
need to be
changed, input new values in the text fields.
3.
If you wish to enable Internet access for the LAN interface, at the
LAN Internet Config
field select
Enabled
. This will open a new dialog window, as shown in Figure 5-6. Refer
to Table 5-4 for a description of the fields.
NOTE: Modifying the IP address of the LAN interface will interrupt the client
computer immediately. You will need to log in again using the new IP address.
Figure 5-6: LAN Internet Config
Table 5-4: LAN Internet
Parameter Name
Description
LAN Internet Enable
Enable or disable Internet access on the LAN interface. The
default is Disabled.
Start IP Address
Starting IP address of the DHCP server
Summary of Contents for Neutrino-224
Page 1: ...Neutrino 224 Indoor 2x125mW FDD TDD eNodeB Installation Guide December 2018 Version 1 7...
Page 20: ...20 Figure 4 7 FDD eNB GUI Home Page Figure 4 8 TDD eNB GUI Home Page...
Page 47: ...47 Figure 5 24 LTE Neigh Freq Settings 1 of 2 Figure 5 25 LTE Neigh Freq Settings 2 of 2...
Page 64: ...64 Figure 5 38 Cell ReSelection Parameter Figure 5 39 Additional Measurement Parameter...
