58
Figure 5-31: Mobility Parameter
Table 5-19: Mobility Parameter
Parameter Name
Description
A1 Event Threshold:
LTE A1 RSRP Threshold The LTE A1 event is triggered when the serving cell’s Reference
Signal Received Power (RSRP) becomes better than the A1
threshold. The A1 event can be used to turn off certain inter-cell
measurements. Range is 0-97 (integer). Default value is 90. In this
example, the recommended value is 45 (integer), which means -
140 dBm + 45 = -95 dBm.
A2 Event Threshold:
LTE A2 RSRP Threshold
The LTE A2 event is triggered when the serving cell’s Reference Signal
Received Power (RSRP) becomes worse than the A2 threshold. Range is
0-97 dB. In this example, the recommended value is 40 (integer), which
means -140 dBm + 40 = -100 dBm.
A3 Event Threshold (Figure 5-32):
LTE A3 Offset
The offset value to be used in the EUTRA measurement report
triggering condition for event A3, as specified in 3GPP 36.331
6.3.5.
Range: -30 to 30
A3 Offset Anr
A3 event triggering threshold for UE Automatic Neighbor
Relation (ANR) measurements of intra-frequency neighbors.
Range: -30 to 30
A4 Event Threshold (Figure 5-33):
A4 RSRP Threshold
The threshold to be used in the EUTRA measurement report
Summary of Contents for Neutrino-224
Page 1: ...Neutrino 224 Indoor 2x125mW FDD TDD eNodeB Installation Guide December 2018 Version 1 7...
Page 20: ...20 Figure 4 7 FDD eNB GUI Home Page Figure 4 8 TDD eNB GUI Home Page...
Page 47: ...47 Figure 5 24 LTE Neigh Freq Settings 1 of 2 Figure 5 25 LTE Neigh Freq Settings 2 of 2...
Page 64: ...64 Figure 5 38 Cell ReSelection Parameter Figure 5 39 Additional Measurement Parameter...
