42
1.
In the eNB GUI, go to System > Upgrade.
2.
Click on
Click Rollback
.
3.
In the pop-up window, click on
OK
.
Wait for about 3 minutes while the eNB reboots.
Caution:
The reboot action will disrupt eNB service.
The version of firmware after rollback will display on the Basic Setting > Basic Info
page under
Software Version
.
5.4.3
Backup
The
Backup
menu is shown in Figure 5-20. Through this menu you can perform the following:
•
Import configuration files
•
Back up the current eNB configuration
•
Back up eNB log files and crash files
•
Restore all of the eNB’s default configuration settings
How to use each of these functions is covered in this section.
Figure 5-20: Backup
5.4.3.1
Import Configuration Files
Follow the steps below to import eNB configuration files - e.g., to create a new eNB using the
configuration from an existing eNB.
Summary of Contents for Neutrino-224
Page 1: ...Neutrino 224 Indoor 2x125mW FDD TDD eNodeB Installation Guide December 2018 Version 1 7...
Page 20: ...20 Figure 4 7 FDD eNB GUI Home Page Figure 4 8 TDD eNB GUI Home Page...
Page 47: ...47 Figure 5 24 LTE Neigh Freq Settings 1 of 2 Figure 5 25 LTE Neigh Freq Settings 2 of 2...
Page 64: ...64 Figure 5 38 Cell ReSelection Parameter Figure 5 39 Additional Measurement Parameter...
