Baicells Neutrino-224, Installation Manual

Page: 31 / 86

31
Figure 5-10: IPSec Tunnel – Basic Setting
Table 5-7: IPSec Tunnel – Basic Setting
Parameter Name Description
Enabled Enable or disable the IPSec tunnel. The default value is Enabled.
leftAuth Attention : DO NOT change this value!
Local authentication type of the IPSec. Must be consistent with
the security gateway side.
Options are:
• psk
• pubkey
rightAuth
Attention
: DO NOT change this value!
Peer authentication type of the IPSec. Must be consistent with
the security gateway side.
Options:
• psk
• pubkey
Gateway IP address of the IPSec server (security gateway), 0-64 digit
string. Must be consistent with the security gateway side.
Right Subnet IP address of the remote subnet, 0-64 digit string. Messages
within this address range will be packed as a tunnel. Must be