Baicells Neutrino-224, Installation Manual

Page: 55 / 86

55
5.5.1.5.1 Neigh Freq List
1. In the eNB GUI go to LTE Setting > GSM Freq/Cell (Figure 5-29).
Figure 5-29: GSM Freq/Cell
2. Under Neigh Freq List , click on the Add icon to add the neighboring GSM eNBs’
frequencies (up to 12). Each field is described in Table 5-17. Click on Save after setting
the values.
Table 5-17: Neigh Freq List
Parameter Name Description
qRxLevMin Minimum access level. Only when the received signal power
measured by the UE is higher than this threshold will the UE be
allowed to connect to this cell.
Reselection Priority Priority of the reselection to cells at this frequency
threshXHigh Reselection threshold for higher priority inter-band frequency.
This parameter represents the access threshold level at which
the UE will leave the serving cell and reselect another cell at
the target frequency, given that the target frequency cell has a
cell reselection priority higher than the serving one
threshXLow Reselection threshold for lower priority inter-band frequency.
This parameter represents the access threshold level at which
the UE will leave the serving cell and reselect another cell at
the target frequency, given that the target frequency cell has
an absolute priority lower than the serving one.
bandIndicator DCS1800/PSC1900 frequency band indicator
bcchArfcn ARFCN for GSM neighbor frequency
nccPermitted Permitted NCC of the neighbor cell
pMaxGeran The allowed max upload transmitted power
arfcnSpacing ARFCN interval of frequency point list.
numOfFollowingArfcns ARFCN number of frequency point list