Pagina 20 di 62
This manual is the property of Bad Bike; any reproduction, even partial, is forbidden.
E
5.13 Electric power train control
ATTENTION
FIRE HAZARD
A malfunctioning or damaged electric power train can cause a short circuit and a subsequent fire.
●
Visually check that all the electric wires are intact and correctly installed.
●
Turn the power box on only after performing all the other controls.
●
If an LCD display is installed, pay attention to the warning messages on it.
●
Use the Bicycle only if the electric power train is intact and on the LCD (if present) there are no
warnings. If not, use the Bicycle only after an appropriate maintenance.
Some models have an easy LCD from Bad Bike to control the electric power train.
To adjust and use the display, refer to the following instruction or
download it from http://
www.bad-bike.it/download.html
(LCD display manual, display Bad Bike)
.
This button increases the electric
power assistance. If pushed for
about 5 seconds, it turns the lights
on or off.
Battery residual
charge.
This button decreases the
electric power. If pushed for
about 5 seconds, it regulates
the soft start.
On/Off start button.
