![background image](http://html2.mh-extra.com/html/baby-lock/enterprise-bnt10l/enterprise-bnt10l_instruction-and-reference-manual_3203890260.webp)
APPENDIX
————————————————————————————————————————————————————————————————————————————
258
1
Turn on the machine. After the carriage
moves to its initial position, turn off the
machine.
Note
●
Be sure to adjust the cap frame driver with
the carriage at its initial position.
2
Using the Allen screwdriver (medium),
loosen the two hexagonal screws. Loosen the
screws only by about one turn.
1
Hexagonal screws
2
Allen screwdriver (medium)
Note
●
Do not loosen them too far.
3
Lower the L-shaped bracket to make it touch
the machine bed and then tighten the two
hexagonal screws using the Allen
screwdriver (medium). Firmly tighten the
screws.
1
L-shaped bracket
4
Using the Allen screwdriver (large), loosen
the four hexagonal screws on the inside of
the ring. Loosen the screws only by about
one turn.
1
Hexagonal screws
2
Allen screwdriver (large)
X
When the screws are loosened, the ring
can be lowered.
Note
●
Do not loosen them too far.
5
Insert the pad between the machine bed and
the ring of the cap frame driver.
1
Pad
2
Machine bed
3
Ring of the cap frame driver
Summary of Contents for Enterprise BNT10L
