Baby Lock Enterprise BNT10L, Instruction And Reference Manual

Page: 94 / 312

OTHER BASIC PROCEDURES —————————————————————————————————————————————————————————————————
92
Note
●
The embroidery frame indicators show all embroidery frame sizes in which the embroidery pattern
can be sewn. Be sure to use an embroidery frame of the most suitable size. If the embroidery frame
that is used is too large, the pattern may be misaligned or the fabric may pucker.
●
All genuine embroidery frames that can be used with EMP6, BMP6, BMP8 and BMP9 can be
installed on this machine.
●
When sewing with a following optional embroidery frame; jumbo frame, border frame, quilt frame
or flat frame, the optional table must be installed to the machine.
●
Due to the weight of the embroidery frame and fabric it is recommended that the optional table be
used, to prevent the frame holder from bending, which may result in the distortion of your design or
machine damage.
Em
br
oi
der
y
fr
am
e h
o
ld
er
B
Quilt frame (optional) 200 mm (H) × 200 mm (W) (7-7/8 inches (H) ×
7-7/8 inches (W))
Consult your
nearest Baby
Lock retailer.
Use when embroidering pieces for quilts.
Border frame (optional) 100 mm (H) × 300 mm (W) (4 inches (H) ×
11-3/4 inches (W))
Use when embroidering a long string of characters or
patterns.
Jumbo Frame (optional) 360 mm (H) × 360 (W) mm (14 inches (H) ×
14 inches (W))
Refer to
“Embroidery
Patterns for
the Optional
Jumbo
Frame” on
page 249.
Use when embroidering combined patterns with a size less
than 350 mm (H) × 200 mm (W) (13-3/4 inches (H) × 7-7/8
inches (W)) or patterns with a maximum size of 350 mm
(H) × 350 mm(W) (13-3/4 inches (H) × 13-3/4 inches (W)).
Em
b
roide
ry
fr
am
e h
o
ld
er C
(o
pt
io
na
l)
Round frame (optional)
∅
=diameter
∅
100 mm (4 inches)
∅
130 mm (5 inches)
∅
160 mm (6 inches)
Consult your
nearest Baby
Lock retailer.
Use when adding a built-in embroidery pattern to a sleeve.
Select the frame appropriate for the size of the pattern.
Cap frame wide type (optional) 60 mm (H) × 360 mm (W) (2-3/8 inches (H) × 14 inches
(W))
(For details on
attaching this
frame, refer to
“Using the
Optional Cap
Frame” on
page 253.)
Use when embroidering caps.
Baseball (golf) caps, tulip hats and bucket hats can be
embroidered with these frames.
These frames cannot be used with hats having a front area
of 60 mm (2-3/8inches) or less, such as sun visors and
children’s hats.
In addition, these cannot be used with hats that have a
brim longer than 80 mm (3-1/8 inches).
Cylinder frame (optional) 80 mm (H) × 90 mm (W)
(3 inches (H) × 3-1/2 inches (W))
Consult your
nearest Baby
Lock retailer.
Use when embroidering tubular and curved fabric, such as
shirt sleeves and trousers.
Embroidery type
Embroidering area
Reference
Usage