UMAX180800, 20 Thermocouple, 2 RTD, 4 Inputs, 6 Relays Dual CAN Controller
Version 1
Page: 46-71
Lamp Set by Event in DTC
Drop List
0, Protect
Refer to Section 3.14
SPN for Event used in DTC
0x00…0x7FFFF
-
Refer to Section 3.14
FMI for Event used in DTC
Drop List
0
Refer to Section 3.14
Delay Before Sending DM1
0…60000
1000
Refer to Section 3.14
4.3.4 Thermocouple Input Setpoints
The Thermocouple Input setpoints are defined in Section 3.4.Refer to that section for detailed
information on how these setpoints are used. The screen capture below in Figure 16 displays
the available setpoints for each of the Thermocouple Inputs.Table 39 below highlights the
allowable ranges for each setpoint.
Figure 16: Screen Capture of Default Thermocouple Input Setpoints
Table 39: Default Thermocouple Input Setpoints
Name
Range
Default
Notes
