UMAX180800, 20 Thermocouple, 2 RTD, 4 Inputs, 6 Relays Dual CAN Controller
Version 1
Page: 50-71
Input 3 Gain
-
100…100
1
Input 4 Source
Drop List
Control not used
Refer to Table 5
Input 4 Number
Depends on control source
1
Refer to Table 5
Input 4 Minimum
-10
6
…10
6
0.00
Input 4 Maximum
-10
6
…10
6
100.00
Input 4 Gain
-
100…100
1
Math Function 1
Drop List
=, True When InA Equals InB See
Math Function 2
Drop List
=, True When InA Equals InB See
Math Function 3
Drop List
=, True When InA Equals InB See
4.3.7 Conditional Logic Block Setpoints
The Conditional Block setpoints are defined in Section 3.8. Refer to that section for detailed
information on how these setpoints are used. The screen capture in Figure 19 displays the
available setpoints for each of the Conditional Blocks. The table below the screen capture
highlights the allowable ranges for each setpoint.
Figure 19: Screen Capture of Conditional Block Setpoints
Table 42. Default Conditional Block Setpoints
Name
Range
Default
Notes
Conditional Function Enabled
Drop List
Disabled
Condition 1 Argument 1 Source
Drop List
Digital Input Refer to Table 5
Condition 1 Argument 1 Number
Depends on Source Selected 0
Refer to Table 5
Condition 1 Argument 2 Source
Drop List
Digital Input Refer to Table 5
Condition 1 Argument 2 Number
Depends on Source Selected 0
Refer to Table 5
Condition 1 Operator (Argument 1/2)
Drop List
0
Refer to Table 22
Condition 2 Argument 1 Source
Drop List
Digital Input Refer to Table 5
Condition 2 Argument 1 Number
Depends on Source Selected 0
Refer to Table 5
Condition 2 Argument 2 Source
Drop List
Digital Input Refer to Table 5
