AXIOMATIC AX030210 User Manual Download Page 2 | Manualshive

Page: 2 / 86

background image

Copyright 2020

OUR PRODUCTS

Actuator Controls

Automotive Ethernet Converters

Battery Chargers

CAN bus Controls

CAN/Wifi, CAN/Bluetooth

Current/Voltage Converters

DC/DC Power Converters

Engine Temperature Scanners

Ethernet/CAN Converters,
Switches

Fan Drive Controllers

Gateways, CAN/Modbus Protocols

Gyroscope Inclinometers

Hydraulic Valve Controllers

Inclinometers, Triaxial

I/O Controls

LVDT Simulators

Machine Controls

Modbus Controls

Motor Controls

Power Supplies

PWM Signal Converters/Isolators

Resolver Signal Conditioners

Service Tools

Signal Conditioners, Converters

Strain Gauge CAN Controls

Surge Suppressors

OUR COMPANY

Axiomatic  provides  electronic  machine  controls,  components,  and  systems  to
the  off-highway,  commercial  vehicle,  electric  vehicle,  power  generator  set,
material handling, renewable energy and industrial OEM markets.

We innovate with engineered and off-the-shelf machine controls that add
value for our customers.

We emphasize service and partnership with our

customers, suppliers, and employees to build long term relationships and
mutual trust.

QUALITY DESIGN AND MANUFACTURING

Axiomatic in Canada operates an ISO 9001:2015 registered design and
manufacturing facility.

SERVICE

All products to be returned to Axiomatic require a Return Materials
Authorization

Number

(RMA#).

Please

request

an

RMA#

from

[email protected].

Please provide the following information when requesting an RMA number:

• Serial number, part number
• Axiomatic invoice number and date
• Hours of operation, description of problem
• Wiring set up diagram, application
• Other comments as needed

All products should be serviced by Axiomatic. Do not open the product and
perform the service yourself.

DISPOSAL

Axiomatic products are electronic waste. Please follow your local environmental
waste and recycling laws, regulations and policies for safe disposal or recycling
of electronic waste.

WARRANTY, APPLICATION APPROVALS/LIMITATIONS

Axiomatic Technologies Corporation reserves the right to make corrections,
modifications, enhancements, improvements, and other changes to its products
and services at any time and to discontinue any product or service without
notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. Users
should satisfy themselves that the product is suitable for use in the intended
application. All our products carry a limited warranty against defects in material
and workmanship. Please refer to our Warranty, Application
Approvals/Limitations and Return Materials Process as described on

www.axiomatic.com/service.html

.

CONTACTS

Axiomatic Technologies Corporation

5915 Wallace Street
Mississauga, ON
CANADA L4Z 1Z8
TEL: +1 905 602 9270
FAX: +1 905 602 9279

www.axiomatic.com

Axiomatic Technologies Oy

Höytämöntie 6
33880 Lempäälä
FINLAND
TEL: +358 103 375 750
FAX: +358 3 3595 660

www.axiomatic.fi

«
1
2
3
4
...
»

Summary of Contents for AX030210























































































Reviews:

No comments

Related manuals for AX030210

Brand: KEENZ Pages: 24

Brand: National Instruments Pages: 102

Brand: NAU ROBOTICS Pages: 109

Maschine Mikro MK2

Brand: Native Instruments Pages: 181

Brand: Yoshitake Pages: 4

Brand: YOKOGAWA Pages: 20

UTAdvanced UT32A

Brand: YOKOGAWA Pages: 3

Brand: Trane Pages: 72

Brand: Dickey-John Pages: 109

by-me Eikon 20526

Brand: Vimar Pages: 6

Brand: CAME Pages: 128

Brand: Nordson Pages: 20

Brand: Jetter Pages: 62

Brand: HORI Pages: 1

Brand: TechNexion Pages: 80

Brand: Parker Pages: 24

Brand: REMKO Pages: 20

PyroSigma Series

Brand: Calex Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands