UMAX030211 Version 1.0.2. Preliminary Documentation – May be subject to change
80 - 85
NOTE: It is good practice to tick the “Erase All ECU Flash Memory” box. Please note, that
selecting this option will
erase ALL data stored in non-volatile flash
. It will also
erase any configuration of the setpoints that might have been done to the ECU
and reset all setpoints to their factory defaults. In case the controller contains custom
settings, those settings need to be saved to PC before reflashing.
A progress bar will show how much of the firmware has been sent as the upload progresses. The
more traffic there is on the J1939 network, the longer the upload process will take.
Once the firmware has finished uploading, a message will pop up indicating the successful operation.
If you select to reset the ECU, the new version of the AX030211 application will start running, and
the ECU will switch back to CANopen communications. Otherwise, the next time the ECU is power-
cycled, the AX030211 application will run rather than the bootloader function.
