Avocent MergePoint 5200, Installer/User Manual

Page: 22 / 80

10 MergePoint 5200 Service Processor Manager Installer/User Guide
To add a master key:
1. Click the System tab.
2. In the top navigation bar, click Licenses . The License window appears.
3. Click Add Master Key . The Add-On License Key window appears.
4. Type the master key.
5. Click Apply Changes .
To add a slave key:
1. Click the System tab.
2. In the top navigation bar, click Licenses . The License window appears.
3. Click Add Master Key . The Add-On License Key window appears.
4. Type the slave key into the window.
5. Click Apply Changes .
Setting Up the MergePoint 5200 SP Manager
To set up the MergePoint 5200 SP manager:
1. (Optional) Set the BMC provisioning range of the MergePoint 5200 SP manager. [See BMC
Provisioning (IPMI Targets Only) on page 11.]
2. (Optional) Activate alert actions as desired. (See Using the Alerts Viewer on page 28.)
3. Discover new target devices. (See Viewing the Assigned Target Devices on page 13.)
4. Configure the MergePoint 5200 SP manager settings. (See Configuring the MergePoint 5200
SP Manager on page 20.)
5. Configure target devices for management. (See Configuring Target Devices for Management
on page 37.)