Avocent MergePoint 5200, Installer/User Manual

Page: 32 / 80

20 MergePoint 5200 Service Processor Manager Installer/User Guide
2. In the top navigation bar, click Default Target User . The Default Target User window appears.
3. Select the user you wish to delete.
4. Click Delete . The user is removed from the default target user list.
To edit a default user (for Admin users only):
1. Click the Targets tab.
2. In the top navigation bar, click Default Target User . The Default Target User window appears.
3. Click Edit next to the user you wish to modify.
4. In the Default User Configuration window, modify any of the following information for the
default target device user:
a. In the Username field, type a new username.
b. In the Password field, type a new password.
5. Click Apply Changes .
Configuring the MergePoint 5200 SP Manager
Configuration under System - Setting
You can use the System tab in the MergePoint 5200 service processor manager to do the following
tasks under the Setting tab:
• Change the appliance name (alias)
• Configure groups of target devices for performing power management
• Reboot
To change the MergePoint 5200 SP manager alias (for Admin users only):
1. Click the System tab.
2. In the top navigation bar, click Setting . The Appliance Setting window appears.
3. In the Alias field, type the new name for the MergePoint 5200 SP manager.
4. Click Apply Changes . The name of the SP manager is changed in the side navigation bar. The
name of the default device group is also changed.
To configure device group actions (for Admin users only):
1. Click the System tab.
2. In the top navigation bar, click Setting . The Appliance Setting window appears.
3. Type the number of target devices to turn on simultaneously in a group.
4. Type the time interval in seconds to elapse between turning on each target device in a series of
grouped target devices.
5. Type the number of target devices to turn off simultaneously in a group.