Avocent MergePoint 5200, Installer/User Manual

Page: 42 / 80

30 MergePoint 5200 Service Processor Manager Installer/User Guide
To configure action settings (for Admin users only):
1. Click the Alerts tab.
2. In the top navigation bar, click Action .
3. Click Action Setting .
4. Specify the following parameters:
• In the SMTP Server field, type the Simple Mail Transfer Protocol (SMTP) server address
for sending emails.
• In the SMTP Server Account field, type the account used as the email sender.
• In the SMTP Server Password field, type the password for the SMTP server account.
• In the SMTP Sender field, type the display name of the email sender.
• In the MSN User field, type the MSN account used as the MSN message sender.
• In the MSN Password field, type the password for the MSN user.
• In the YAHOO IM User field, type the YAHOO IM account used as the YAHOO IM
message sender.
• In the YAHOO IM Password field, type the password for the YAHOO IM account.
5. Click Apply Changes .
To create an alert action (for Admin users only):
1. Click the Alerts tab.
2. In the top navigation bar, click Action .
3. Click Add .
4. In the Action Configuration area, specify the following information:
a. Select the Action Type from the drop-down menu: Email , MSN , YAHOO or
SNMP Forward .
b. If you selected Email , type the email address of the receiver in the Email Address field.
-or-
If you selected MSN , type the MSN account of the receiver in the Email Address field.
-or-
If you selected SNMP Forward , type the IP address of the destination machine in the
Receiver field.
-or-
If you selected YAHOO , type the YAHOO IM account of the receiver in the
YAHOO field.
5. Click Apply Changes .
To delete an alert action (for Admin users only):
1. Click the Alerts tab.
2. In the top navigation bar, click Action .