3 Installation der FRITZ!Card – Windows 3.x
24
2. Installing FRITZ!Card in the PC
• After checking and, if necessary, changing the jumper posi-
tion on
FRITZ!Card
, installation of
FRITZ!Card
is now car-
ried out. Before performing the installation, switch off the
PC and all other connected units and pull out the power
plugs.
• Loosen the screws of the PC housing and open the PC.
• Select an appropriate slot, remove the slot plate on the top
end and insert
FRITZ!Card
into the selected slot.
• Screw
FRITZ!Card
tightly to the top end of the slot.
• Close the computer, tighten the screws and reconnect the
power plugs. The installation of
FRITZ!Card
is now com-
pleted.
3. Connecting FRITZ!Card to ISDN
•
FRITZ!Card
must now be connected to the ISDN. Take the
cable supplied with the card and insert the plug into the
FRITZ!Card
socket.
• Simply insert the other end of the cable into the ISDN socket.
4. Installing the FRITZ!Card Driver Software
Once
FRITZ!Card
has been installed in the PC and connected to
ISDN, the next step is to install the
FRITZ!Card
driver software.
• Start your PC.
• Insert the
FRITZ!Card
CD into your CD drive and call up the
FRITZ!Card
CD introduction by double-clicking on the file
INTRO.HLP in the root directory of the CD.
• On the welcome page of the introduction, click on the icon
for
FRITZ!Card
and on the next page, click on the
Windows
3.x
icon.
• On the following page, click on the icon
ISDN-Controller
FRITZ!Card
and then on the following page, click on the
Start
installation
icon.
Summary of Contents for FRITZ!CARD Classic
Page 35: ...5 FRITZ Installation 35 ...
