3 How to Install FRITZ!Card – Windows 95
17
You may also specify a different folder. If the information
you have given is correct, click on
Next
.
• Now in the next window, specify which D channel protocol in
used on your ISDN connection (1TR6 or DSS1). Click on the
desired protocol type and then on
Next
.
• The installation program will now copy all files to the speci-
fied folder. The driver is entered in the
Registry
so that
FRITZ!Card
is activated automatically when Windows 95 is
started. When you exit Windows 95,
FRITZ!Card
is automati-
cally deactivated.
• In the last window of the installation procedure you will see
details about the I/O area (I/O address) and interrupt under
which
FRITZ!Card
is managed in the system and about the
D channel protocol used. Confirm these details with
OK
.
• After successful completion of the installation program, you
are requested to restart Windows 95. Confirm this request
by clicking on
OK
.
• After restarting Windows 95, the menu item “Programs” in
the Start menu contains a new folder called
AVM
. This con-
tains the files
FRITZ!Card Readme
,
FRITZ!Card Setup,
FRITZ!Card Test
and
AVM Internet Home Page
(link to the
AVM pages on the Internet, requirement: WWW browser and
Internet access).
FRITZ!Card Readme
contains up-to-date information on FRITZ!Card.
You can reselect the D channel protocol afterwards using the
FRITZ!Card Setup program and activate CAPI SoftCompression X75/
V42bis. The FRITZ!Card Test program checks the functional integrity
of FRITZ!Card.
The installation of
FRITZ!Card
for Windows 95 is now completed.
3.1.1 Changing the Settings in the Software
Should you wish to change the value for the I/O area (I/O ad-
dress) and the interrupt for
FRITZ!Card
, go into the Device
Manager and enter the desired values there. More detailed
information on setting the I/O area directly on
FRITZ!Card
may
Summary of Contents for FRITZ!CARD Classic
Page 35: ...5 FRITZ Installation 35 ...
