5 FRITZ! Installation
32
5
FRITZ! I
NSTALLATION
On the CD you will find two different versions of the
FRITZ!
com-
munications software. One version,
FRITZ!
, is a 16-bit version
for Windows 3.x. The other version,
FRITZ!32
, is a 32-bit ver-
sion for Windows 95 and Windows NT. Both versions are based
on the CAPI 2.0 application interface.
The procedure for installing the two versions of
FRITZ!
is the
same. Proceed as follows to install
FRITZ!
or
FRITZ!32
:
• Restart your computer. If you are using Windows 3.x, open
Windows.
• Insert the
FRITZ!Card
CD in your CD drive again.
The CD introduction starts automatically under Windows 95
and Windows NT.
In Windows 3.x, click on the file INTRO.HLP in the root
directory on the CD in order to open the CD introduction.
• On the first page, click on the
FRITZ!Card
icon.
• On the next page, select the operating system installed on
your computer by clicking on the corresponding icon.
• On the following page, click on the icon “FRITZ!32 Software
Package” or “FRITZ! Software Package”.
• To start the installation, click the
Start Installation
button
on the following page.
• The initialization sequence of the installation program is
displayed. When initialization has been completed, the
welcome screen for the installation is displayed. Activate the
Next
command. You can quit the installation procedure at
any time by means of the
Exit
button.
• First specify the folder/directory in which
FRITZ!
is to be
installed. The default for Windows 95 and Windows NT is
C:\PROGRAM FILES\FRITZ!\. The default for Windows 3.x is
C:\FRITZ!. You can specify any path you wish. Confirm your
choice with
Next
.
Summary of Contents for FRITZ!CARD Classic
Page 35: ...5 FRITZ Installation 35 ...
