3 Installation der FRITZ!Card – Windows NT
22
• To take
FRITZ!Card
into operation, restart Windows.
FRITZ!Card
is loaded every time Windows is started. When
you exit Windows,
FRITZ!Card
is automatically deactivated.
The installation of
FRITZ!Card
for Windows NT 4.0 (Worksta-
tion i386) is now completed.
3.2.1 Changing the Settings in the Software
If you wish to subsequently change the value for the I/O area
(I/O address) and the interrupt, you must reinstall the
FRITZ!Card
driver software.
3.2.2 Uninstalling FRITZ!Card in Windows NT
To uninstall
FRITZ!Card
in Windows NT, open the Control Panel
of Windows NT (Start/Settings) and double-click on the
Add/
Remove Programs
icon. “AVM ISDN-Controller FRITZ!Card” is
included in the list of installed software. Mark this entry and
then click on the
Add/Remove
button. The uninstall program is
started. Confirm your intention to uninstall the software by click-
ing
Yes
. Finally you are requested to restart the computer. This
concludes the uninstallation of the driver software for
FRITZ!Card
.
Summary of Contents for FRITZ!CARD Classic
Page 35: ...5 FRITZ Installation 35 ...
