AVM FRITZ!CARD Classic, Manual

Page: 21 / 37

3 Installation der FRITZ!Card – Windows NT
21
• On the following page, click on the icon ISDN-Controller
FRITZ!Card and then on the following page, click on the Start
installation icon.
• After completion of initialization, the welcome screen for in-
stallation appears. Click on Next . You can quit the installa-
tion procedure at any time by means of the Exit button.
• In the next window, specify the folder in which you wish to
install the FRITZ!Card software. The default is C:\IDRIVER.
You may also specify a different folder. If the information
you have given is correct, click on
Next .
• Now specify which D channel protocol is used on your ISDN
connection (1TR6 or DSS1 (EURO-ISDN)). Click on the desired
option. Click on the
Next button.
• In the next window, you must specify the I/O area (I/O ad-
dress) under which the controller is to be managed in the
system. Specify the area which corresponds to the jumper
position on the controller.
• Then in the next window, specify the interrupt for the con-
troller.
• The installation program will now copy all files to the speci-
fied folder. In the last window of the installation procedure
you will see details about the I/O area and interrupt under
which
FRITZ!Card is managed in the system and about the
D channel protocol used. Confirm these details with OK .
The Windows system environment includes a new program
folder called
AVM
. This contains the files
FRITZ!Card
Readme
,
FRITZ!Card Setup, FRITZ!Card Test
and
AVM
Internet Home Page
(link to the AVM pages on the Internet,
requirement: WWW browser and Internet access).
FRITZ!Card Readme contains up-to-date information on FRITZ!Card.
You can reselect the D channel protocol afterwards using the
FRITZ!Card Setup program and activate CAPI SoftCompression X75/
V42bis. The FRITZ!Card Test program checks the functional integrity
of FRITZ!Card.