Connecting Network Cables with a 10 Gb System Director Connection
62
System Director and Engine 10 Gb Network Connections to Switch
3. Connect a 10 Gb optical network cable to left 10 Gb port (as seen from the rear of the
Engine) on the Engine Controller of the ISIS 2000 Engine. No other 10 Gb port on the
Engine has been configured for this connection.
The 10 Gb port on the ISIS 2000 Engine Controller requires an SFP+ transceiver.
4. Connect the other end of the 10 Gb network cable to a 10 Gb port on your ISIS 2000 switch.
Depending on the type of switch you have, an X2 or SFP+ transceiver might be needed for
the switch port.
n
The Force10 S4810 switches need SFP+ transceivers with an LC to LC cable connection. The
Cisco 4900M switches need an X2 transceiver for the SC type connector with an LC to SC cable
connection.
5. Repeat steps 3 and 4 if connecting a multiple ISIS 2000 Engines (up to five ISIS 2000
Engines are supported).
Force10 4810 switch with
1 Gb and 10 Gb connections
10 Gb Ethernet LC to LC connection
10 Gb Ethernet
LC to LC connections
1 Gb connection
10 Gb connection
Optional 1 Gb Ethernet connection to house network
1 Gb managment port
Summary of Contents for ISIS 2000
Page 1: ...Avid ISIS 2000 Setup Guide...
