Management Console Error Messages
153
To recover from a failed media drive:
1. Physically remove the failed drive (the drawer and drive Fault LED should be lit).
2. Insert the replacement drive.
3. After a short time, the Storage Manager makes the new drive a spare and clears the state (this
could take a few minutes).
To recover from a removed/reconnected media drive or a previously used media drive
(from another ISIS 2000 Engine was added as a replacement spare):
1. Open Storage Manager Agent.
2. Click Advanced > Disk Tools > Clear Foreign Config.
3. Enter password and click Clear.
4. After a short time, the Storage Manager makes the problematic disk spare and clears the
state (this could take a few minutes)
Invalid Drive — Foreign Disk Message
The “Invalid drive - Foreign disk” status in the Management Console denotes that a physical disk
is connected in the Engine, but is not either raw or already part of the existing ISIS configuration.
This can happen if a disk has an existing file system or was moved from a running system.
To recover from a removed/reconnected media drive or a previously used media drive
(from another ISIS 2000 Engine was added as a replacement spare):
1. Open Storage Manager Agent.
2. Click Advanced > Disk Tools > Clear Foreign Config.
3. Enter password and click Clear.
4. After a short time, the Storage Manager should make the problematic disk spare and clears
the state (this could take a few minutes)
Disk Performance Degraded Message
The “Disk performance degraded” status can appear for the following reasons:
•
Failed physical disk
•
Disks reporting too many long I/Os
For a failed disk, the status typically includes “Missing spare drive,” see
.
Summary of Contents for ISIS 2000
Page 1: ...Avid ISIS 2000 Setup Guide...
