Avid Technology ISIS 2000 Setup Manual Download Page 141

Page: 141 / 213

Available Utilities

141

There is also a

PartitionDump.bin

file. This file is also helpful when identifying the data on

the media drives. If possible, include this file with the two Partition metadata files.

The following are a couple suggested ways of saving the Partition0 and Partition1
PartitionDump.bin files.

Use a USB flash drive that has the capacity for the Partition

files (at least a 4 GB USB

is recommended).

Create a network share on a client system on the network and copy the Partition

files to

that shared folder.

3. Verify that you have the current copy of the Metadata by comparing the date in the Metadata

tab of the ISIS control Panel.

4. Start the System Director service using the ISIS Control Panel.

Available Utilities

The following is a list of headings in the

Avid ISIS Administration Guide

that describe other

utilities and tools for monitoring and troubleshooting.

•

Avid ISIS System Director Control Panel

•

ISIS Management Console

Changing the Administration Password

Setting up Error Notification

Avid ISIS Snapshot Tool

Using the Profile Tool

•

System Statistics

•

System Logging

Accessing the Logging Window

Viewing Event Logs

•

Avid ISIS Connection Analyzer Tool

•

Avid ISIS Log Aggregator Tool

•

Avid ISIS Disk Analyzer Tool

Summary of Contents for ISIS 2000






















































































































































































































Search results

Summary of Contents for ISIS 2000

Reviews:

Related manuals for ISIS 2000

Brands by name

Popular brands

Avid Technology ISIS 2000, Setup Manual

Search results

Summary of Contents for ISIS 2000

Reviews:

Related manuals for ISIS 2000

Brands by name

Popular brands