Avid Technology ISIS 2000, Setup Manual

Page: 50 / 213

Installing the Cooling Modules
50
6. After populating one drawer, close it and populate the second drawer, see “Opening and
Closing the Media Drive Drawers” on page 46 .
Installing the Cooling Modules
This section describes how to install the cooling module.
To insert a cooling module:
1. Position the cooling module so that the red release latch and handle are on the right-hand
side.
2. Slide the cooling module into its slot until the latch clicks in place.
3. Repeat this procedure to install the remaining four cooling modules into the cooling module
slots.
Installing the Power Supplies
This section describes how to install the power supplies.
To insert a power supply:
1. Position the power supply so that the red release latch and handle are on the left-hand side.
2. Slide the power supply into its slot until the latch clicks in place.