Rack-Mounting the Equipment
43
To mount the Engine into the rack:
1. (Option) If using racks with threaded holes, you need to unscrew and remove the five round
pegs on each end of the bracket rail.
2. Loosen the four slide adjustment screws so that the bracket rail side allows you to adjust the
bracket rail to the depth of your rack.
The adjustment screws are highlighted in a colored circle around the screw.
3. Position the bracket rail between your rackmount rails and adjust the length of the bracket so
that is meets the inside of both the front and rear rails as shown in the following figure.
Slide adjustment screws
Round pegs
Bracket rail
Rack mount screws
Bracket rail
Rack enclosure
Mounting rails
Summary of Contents for ISIS 2000
Page 1: ...Avid ISIS 2000 Setup Guide...
