![background image](http://html1.mh-extra.com/html/avery-dennison/indes-elastic-staple-11600-0/indes-elastic-staple-11600-0_operation-and-service-manual_3030393016.webp)
14
Chapter 5 Loading the Fastener
Loading the Fastener from the Reel to the Module Assembly
ü
Refer to the Staple Loading Diagram on next page:
1. With the staple reel mounted on the reel holder, unroll the staple chain from the top of
the reel.
2. Pulling the staple chain toward the Module Assembly, the rear rung (2) inserts into the
right side of the Module Assembly.
3. Pulling the staple chain toward the Module Assembly, the front rung (3) inserts into the
left side of the Module Assembly.
4. Lower the Staple chain through the slot in the upper handle guide.
5. Lower the Staple chain through the slot in the lower handle guide.
6. Lower the Staple chain evenly into the right and left Module Assembly Feed guides.
7. Lower the Staple chain down to the entrance of the Module Assembly Feed guides.
8. See next section “
Loading the Fastener into the Module’s Feed System
” for more
instructions
WARNING
Air supply must be connected during this procedure.
WARNING
Module needles are sharp. Use caution when removing and
replacing needles and during operation.
Discard needles that are damaged or have punctured the skin
!
!
Summary of Contents for IndES Elastic Staple 11600-0
