Avery Dennison IndES Elastic Staple 11600-0, Operation And Service Manual

Page: 21 / 58

19
Adjusting for Single Shot or Double Shot Operation
ü With staple chain loaded in the Module Assembly per the previous chapter:
Air Supply must be ON
1. Locate the single shot mode / double shot mode screws on the Module’s feed systems
2. Move the screws to the “I” for single shot mode or “II” for the double shot mode.
•
Both screws must be in the same mode for proper operation
•
Failure to move both screws will cause the machine to jam
3. Tighten the screws
4. Cycle machine a few times to verify proper cutting and feeding.
Mode Screw
Mode Screw
Mode screws in Single Shot mode
Mode screws in double shot mode
Mode Screw
Mode Screw