66
4.6 To Setup the PTZ/IP PTZ Camera
4.6.1
Setup the PTZ Camera
1. In the PTZ control panel, click
Setup
.
2. When the PTZ Setup dialog box appears, select the camera number and check the
Use PTZ
box.
3. In the
Connection Settings
section, select the
COMPort
where the PTZ camera is
connected, PTZ
ID
number,
BaudRate
, and
Protocol
. Then, click
Save
to keep the settings.
4. Use the PTZ control panel and adjust the position of the PTZ camera.
5. In the
Preset Setting
section, select the preset number to assign a number for the PTZ
camera current position. Set the
DwellTime
(1-60 sec) for how long the PTZ camera stays in
that position before it moves to the next one. If you want to add description, check the
Show
Preset Name
box and in the
Preset Name
text box, type the word. When done, click
Save
to
keep the settings.
i
- The numbers of preset position are depended on the IP camera protocol has
supported.
- Only Pelco-P and Pelco-D protocol can support over 16 PTZ preset points.
- Only
Canon
has supported “
Auto Pan Speed
” function.
Using this control
panel to set the
preset position
All manuals and user guides at all-guides.com
