109
-
Relay Setting:
To setup relay device that is embedded on the camera.
1. Click the drop-down list and select the relay ID number.
2. Enter relay name in
Name
column
3. The DVR system automatically detects the camera and input relates information.
In the Content section, enter relay description.
4. In the test section, click
Test
to trigger relay. Red is high and Green is low.
5. Click
OK
to exit and accept the setting and
Cancel
to exit without saving the
setting.
Direct Link by IE
Using IE browser to connect to camera and view the real time video. Click
Direct Link
by IE
，
the IE browser will pop up and connect to camera. The video viewing interface
will be varied by different brand of camera.
i
The Video, Direct Link by IE, and Advanced Setting setup contents may be
varied that depends on the brand of IP camera supported.
(6) Noise Reduction
Reduce undesirable video signal and improve the quality of the video.
i
Noise Reduction uses lots of CPU resource. Please use this feature only if it is really
necessary.
(7) Auto Brightness Control
Automatically adjust the brightness.
All manuals and user guides at all-guides.com
