AVer IWH5416 Touch II SB-51A05 User Manual Download Page 29

Page: 29 / 256

for host addresses. Enter the subnet mask of the IP address which user has assigned
to DVR system.

GATEWAY:

A network device act as a passageway to internet. Enter the network

gateway IP address

DNS:

Domain Name Server translates domain names (such as www.abb.com.tw) to

IP addresses. Enter the IP address of DNS if it is available.

DDNS setting:

To use this feature, go to

http://ddns.avers.com.tw

http://dyndns.org

and

The DDNS setting is not required to setup if user hasn’t apply your domain name yet.



dyndns.org

Domain Name:

The user has applied on website www.dyndns.org.

ID:

The account ID that user has created on website www.dyndns.org.

Password:

The password that user has setup when created an account on

http://www.dyndns.org.

dyndns.org



ddns.avers.com.tw

Domain Name:

The domain name that user has applied on website ddns.avers.com.tw.

CD-Key:

The CD-Key is located on back panel of DVR unit.

Password:

The password that user has setup when applied DNS on website

ddns.avers.com.tw.

ddns.avers.com.tw

All manuals and user guides at all-guides.com

Summary of Contents for IWH5416 Touch II SB-51A05

































































































































































































































































Search results

Summary of Contents for IWH5416 Touch II SB-51A05

Reviews:

Related manuals for IWH5416 Touch II SB-51A05

Brands by name

Popular brands

AVer IWH5416 Touch II SB-51A05, User Manual

Search results

Summary of Contents for IWH5416 Touch II SB-51A05

Reviews:

Related manuals for IWH5416 Touch II SB-51A05

Brands by name

Popular brands