145
b.
Retrieve time:
set the waiting duration before system switching back to original
Preview mode. If the retrieve time is un-mark, the alarm video will keep enlarging until
user switch back to Preview mode manually. The retrieve time range is 3~ 600
seconds.
-
Relay Output
Set to enable/disable the relay operation when the alarm is activated and to extend
additional time in second before it stops the relay operation (see also
Chapter 5.9.1
).
-
IP Camera Relay
To trigger on/off IP camera relay.
-
Play Warning Sound
Play alarm sound. To setup click
Detail
(see also
Chapter 5.9.2)
.
-
Send E-mail
Send an electronic text message. To setup click
Detail
(see also
Chapter 5.9.3
).
-
File Transmission via FTP
Upload file to remote computer thru FTP (File Transfer Protocol). To setup click
Detail
(see
also
Chapter 5.9.4
).
-
Start Recording
Record the video from the selected camera. To setup click
Detail
(see also
Chapter 5.9.5
).
-
SMS (Short Message Service)/MMS (Multimedia Messaging System)
SMS transmits only text messages to mobile phone. MMS transmits text messages and
images over wireless networks using the wireless application protocol (WAP). Make sure
your mobile phone support this feature and your PC is connected to GSM/GPRS modem.
To setup click
Detail
(see also
Chapter 5.9.6
).
-
PTZ preset point
Position the PTZ camera based on the preset point setting. To setup click
Detail
(see also
Chapter 5.9.7
).
All manuals and user guides at all-guides.com