115
5.2.3
Setup PTZ Tracking
PTZ tracking allows user to setup a select range for PTZ camera to tracking the object
automatically when object is out of selected rage.
i
The PTZ tracking will be available when the camera is enabled PTZ function.
1. User need to enable the PTZ function of the camera if the camera is a PTZ/IP PTZ
camera.(see also
Chapter 4.6
)
2. Click
Detail
from the Camera Setting windows.
3. Configure the following selections to complete the PTZ tracking.
(1) Show Trigger Line in Live Video:
Enable/disable the tracking line on the preview screen.
(2)
Left Trigger Line
(red line)
:
Set the left edge of the tracking range. If the object is out of
the range edge, the camera will automatically move to track the object.
(3) Right Trigger Line
(red line)
:
Set the right edge of the tracking range. If the object is out
of the range edge, the camera will automatically move to track the object.
(4) Maximum Size(green frame):
Set the maximum size of the object for detection.
(5) Minimum Size(green frame):
Set the minimum size of the object for detection.
(6) Enable PTZ Auto Tracking:
To restore PTZ tracking function after the camera has been
manually control. The PTZ tracking will stop function when user has operated the PTZ
camera manually. Therefore, user can enable this option to make sure the PTZ tracking will
be restored after manually control of the PTZ camera.
(7) Go to PTZ Preset Position:
To move the PTZ camera back to the selected preset
position after PTZ camera tracking the object and the object is missing or out of the camera
view.
All manuals and user guides at all-guides.com
