141
-
IP Camera Sensor:
Click
IP Camera Sensor
to configure IP camera’s sensor condition.
To set the sensor condition for the system to alarm, click
High
or
Low
column. The column
with a circle means is selected.
-
Continue trigger duration:
Set a time period that when sensor has been trigger and stay
in the same status for that period, then the alarm will be sent out.
-
Abnormal Event:
Enable/disable
to set the condition of the event for system to alarm.
System Reboot:
when the DVR system reboot without abnormal condition, the
system will send out the alarm message.
Abnormal Reboot:
when the DVR system reboot in irregular condition, the system
will send out the alarm message.
All manuals and user guides at all-guides.com
