Avaya W310, Command Reference Manual

Page: 284 / 440

Chapter 11 W310 Port Commands
268 Avaya W310 Command Reference Guide
set port edge admin state
User level: privileged, supervisor.
Use the
set port edge admin state
command to set the port as an RSTP edge-port
or non-edge-port.
An edge port is not connected to any other bridge. Only edge ports and point-to-point links
can rapidly transition to forwarding state.
If you set edge admin state to edge-port, the oper state field of the
show port edge
state
command is also set to edge-port. However, if the port receives a BPDU, the oper
state setting changes to non-edge-port. (To receive a BPDU, the port must be connected to a
bridge and thus is not an edge port.
Syntax:
The syntax for this command is:
set port edge admin state <module/port> {edge-port | non-edge-
port}
Examples:
Related Commands:
Use the
show port edge state
command to show a port’s administrative and
operational edge state.
Syntax Description
<module/port> 1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
• To specify ports 1 to 5, type 1/1-5
{edge-port | non-
edge-port} The administrative edge port state of the port:
• edge-port
• non-edge port
W310-1# set port edge admin state 1/1 edge-port
port 1/1 edge admin state is set to edge-port
W310-1# set port edge admin state 1/1 non-edge-port
port 1/1 edge admin state is set to non-edge-port