Avaya W310, Command Reference Manual

Page: 295 / 440

Chapter 11
Avaya W310 Command Reference Guide 279
set port redundancy {enable | disable}
User level: privileged, supervisor.
Use the
set port redundancy {enable | disable}
command to globally
enable or disable the port redundancy pairs you have defined. This command does not delete
the existing redundancy entries from NVRAM.
Syntax:
The syntax for this command is:
set port redundancy {enable | disable}
Example:
Related Commands:
• Use the
set port redundancy
command to define or remove redundancy pairs.
• Use the
show port redundancy
command to display information about the port
redundancy pairs defined for the switch.
set port redundancy
User level: privileged, supervisor.
Use the
set port redundancy
command to define or remove redundancy pairs. A
port redundancy member can be any port (including LAG logical port) that is not a member
of a LAG or another redundancy pair.
W310-1# set port redundancy enable
All redundancy schemes are now enabled