Avaya W310, Command Reference Manual

Page: 317 / 440

Chapter 11
Avaya W310 Command Reference Guide 301
show port edge state
User level: privileged, supervisor.
Use the
show port edge state
command to show a port’s administrative and
operational edge state.
!
You can set the administrative edge state of a port to edge port, but if the port receives a
BPDU, the operational state changes to non-edge port. (To receive a BPDU, the port
must be connected to a bridge and thus is not an edge port.
The syntax for this command is:
show port edge state [<mod_num>[/<port_num>]]
Example:
Related Commands:
Use the
set port edge admin state
command to set the port as an RSTP edge-port
or non-edge-port.
Syntax Description
[<mod_num>[/
<port_num>]] 1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
• To specify ports 1 to 5, type 1/1-5
If you do not specify a number, all ports are displayed.
W310-1> show port edge state 1/1-2
Port admin state oper state
------- ------------- -------------
1/1 edge-port edge-port
1/2 non-edge-port non-edge-port