Avaya W310, Command Reference Manual

Page: 271 / 440

Chapter 11
Avaya W310 Command Reference Guide 255
Related Commands:
Use the show port channel command to display Link Aggregation Group (LAG)
information for a specific switch or port.
set port classification
User level: privileged, supervisor.
Use the
set port classification
command to set the port classification to either
regular or valuable.
Setting a port to valuable means that, if a link failure occurs on the port, a link fault trap can
be sent even when the port is disabled and a fast aging operation on the CAM table is
performed. This feature is particularly useful for the link/intermodule redundancy
application, where you need to be informed of link failures on dormant ports and quickly
resume traffic.
Syntax:
The syntax for this command is:
set port classification <module/port> {regular | valuable}
Example:
Related Commands:
Use the
show port classification
command to display a port’s classification:
valuable or regular.
Syntax Description
<module/port> 1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
• To specify ports 1 to 5, type 1/1-5
{regular | valuable} port classification
W310-1# set port classification 1/15 valuable
Port 1/19 classification has been changed.