Avaya W310, Command Reference Manual

Page: 321 / 440

Chapter 11
Avaya W310 Command Reference Guide 305
show port point-to-point status
User level: user, privileged, supervisor
Use the
show port point-to-point status
command to show a port’s
administrative and operational point-to-point status.
!
If you set the administrative point-to-point status to auto, the operational status is the
link type that is detected. For more information on point-to-point status, see the
set
port point-to-point admin status
command.
Syntax:
The syntax for this command is:
show port point-to-point status [<mod_num>[/<port_num>]]
Example:
Related Commands:
• Use the
set port point-to-point admin status
command to specify
whether a port is connected to a shared LAN segment or a point-to-point LAN segment.
Syntax Description
[<mod_num>[/
<port_num>]] 1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
• To specify ports 1 to 5, type 1/1-5
If you do not specify a number, all ports are displayed.
W310-1> show port point-to-point status
Port point-to-point admin state point-to-point oper state
------- ---------------------------- --------------------------
1/1 auto point to point connection
1/2 auto point to point connection
1/3 auto point to point connection
1/4 auto point to point connection
1/5 auto point to point connection
1/6 auto point to point connection
1/7 auto point to point connection