Avaya W310, Command Reference Manual

Page: 260 / 440

Chapter 10 Policy Commands
244 Avaya W310 Command Reference Guide
W310-1(super/QoS 402/CompOp 14)# dscp 45
3 Exit Composite Operation mode:
W310-1(super/QoS 402/CompOp 12)# exit
W310-1(super/QoS 402) #
Step 3: Add rule 105 to QoS policy 402. This rule will apply composite operation 12 to
traffic going to members of the
mgmt user group:
1 Add rule 105 to QoS policy 402:
W310-1(super/QoS 402)# ip-rule 105
2 Configure rule 105 to filter packets that are destined to members of the mgmt user
group:
W310-1(super/QoS 402/ip rule 105)# destination-user-
group mgmt
3 Apply composite operation 12 to packets that match rule 105.
W310-1(super/QoS 402/ip rule 105)# composite-operation
Op12
4 Exit IP rule mode for rule 105:
W310-1(super/QoS 402/ip rule 105)# exit
W310-1(super/QoS 402/ip rule 105)#
Step 4: Add rule 106 to QoS policy 402. This rule will assign a CoS priority of 7 to
traffic coming from the server at 192.168.0.15:
1 Add a rule 106 to QoS policy 402:
W310-1(super/QoS 402)# ip-rule 106
2 Configure rule 106 to filter packets that have a source of 192.168.0.15:
W310-1(super/QoS 402/ip rule 106)# source-ip host
192.168.0.15
3 Configure rule 106 to apply a CoS priority to packets from the server at
192.168.0.15. This operation sets the 802.1p priority to 7.
W310-1(super/QoS 402/ip rule 106)# composite-operation
CoS7
4 Exit IP rule mode for rule 106:
W310-1(super/QoS 402/ip rule 106)# exit
W310-1(super/QoS 402)#
Step 5: Create composite operation 13 to change the CoS priority and DSCP value of
packets:
1 Create a composite-operation 13.
W310-1(super/QoS 402)# composite-operation 13