22. When the transfer is complete, click
OK
.
23. . After the transfer completes, check the node and click
Restart Application
.
Enabling a SIP virtual trunk
About this task
Enable a SIP virtual trunk in the CS 1000 Element Manager.
Prerequisites:
• Log on to the CS 1000 Element Manager.
• The SIP domain name must not exceed 128 characters. Valid characters are the letters
a to z, numbers 0 to 9, period (.), hyphen (-), comma (,), and underscore (_).
Procedure
1. In the
Element Manager
navigation pane, select
System > IP Network > Nodes:
Servers, Media Cards
.
2. On the
Node Configuration
page, click
Edit
beside the node to configure.
3. Expand
Signaling Servers
.
4. Under
Signaling Servers
, expand
Signaling Server Properties
.
5. In the
Signaling Server Properties
section, in the
Enable Line TPS
list, select
SIP only
.
6. Ensure that
Local SIP TCP/UDP Port to Listen to
is
5060
.
7. In the
SIP Domain
name box, type the SIP domain name.
The SIP domain name builds all SIP messages and appears in the URI phone
context.
8. Click
Save and Transfer
.
9. If you receive a prompt to restart the SIP sever, click
OK
.
10. After the transfer is complete, click
OK
.
11. In the Element Manager navigation pane, select
System > IP Network >
Maintenance and Reports
.
12. In the
Node Maintenance and Reports
pane, expand
Node ID
.
13. Under
Node ID
, click
Reset
.
14. If a confirmation message appears, click
OK
.
CS 1000 configuration
24 Avaya Hospitality Messaging Server 400 Installation and Commissioning
March 2012