Configuring Dialogic HMP
About this task
Configure the Dialogic Host Media Processing (HMP) to enable HMS to place and receive
calls.
Procedure
1. Select
Start > All Programs > Dialogic HMP > Cofiguration Manager DCM
.
2. In the
Configuration Manager
window, right-click
HMP_Software #0 in slot
0/65535
and select
Configure Device
.
3. In the
Properties
window, select the
Default IP Address
tab.
4. Ensure the correct IP address is bound to the HMP Drivers.
Important:
If the wrong IP address is bound to the HMP, the system can function incorrectly;
for example, it may not detect DTMF.
5. Click
OK
.
6. Select
Settings > System/Device autostart > Start System
.
7. Close the
Configuration Manager
window.
8. Reboot the server.
Configuring Dialogic HMP
Avaya Hospitality Messaging Server 400 Installation and Commissioning
March 2012 55
