Prerequisites:
• Ensure that you configure the BIOS to start from the DVD drive. By default, the server starts
from the DVD drive. If the DVD drive is not the default, you must configure the BIOS settings
by pressing F12 on the POST screen and selecting CD-ROM.
Procedure
1. Place the Recovery DVD into the DVD-ROM drive.
2. Exit HMS 400 and reboot the server.
3. In the
Select desired operation
window, select
1. Recovery CD
.
4. Ensure that you read any warnings that appear and press any key to continue the
installation.
5. When the following prompt appears, type
Y
.
Do you wish to perform a system recovery function on this
server, which will result in a complete overwrite of all
present hard drive data? [Y/N]
6. When the following prompt appears, type
Y
.
Would you like to proceed with this recovery function and a
complete overwrite of all present hard drive data? [Y/N]
7. When the following prompt appears, remove the DVD from the DVD-ROM drive,
put the second DVD in the DVD-ROM drive, and click
OK
.
Symantec Ghost needs to open the next part of the image.
Please either insert the next disk and choose OK, or choose
Browse to select the next part of the image.
8. When the following prompt appears, remove the DVD from the DVD-ROM drive and
press
Ctrl + Alt + Delete
to reboot the server. .
The system recovery function has completed successfully.
Please remove all media from drives and reboot the server.
Press any key to continue...
Next steps
After the system image is installed, the field tech should always install the latest Service
Update.
For information on installing a Service Update (SU), see the “Service Updates” chapter in
Avaya Hospitality Messaging Server 400 Maintenance, NN42350–101
.
HMS 400 software installation
54 Avaya Hospitality Messaging Server 400 Installation and Commissioning
March 2012