background image

Variable Definitions

Variable

Value

COS No

The Class of Service number.

Name

The CoS name. The maximum length is 30
characters.

Maximum Message(s) to Keep

The maximum capacity of the mailbox for
new and old messages.

 Important:

The range is 0 to 99 messages but Avaya
recommends that you do not keep more
than 50 messages.

Maximum Message Length

The maximum recording length of a
message in seconds.

 Important:

The range is 0 to 999 seconds but Avaya
recommends that you do not exceed 600
seconds.

Number of Day(s) to Store New Messages

The number of days to retain new messages.
The range is 0 to 999 where 0 is unlimited.
This is typically 0 so the user can decide how
to handle new messages.

Number of Day(s) to Store Old Messages

The number of days to retain old messages.
The range is 0 to 999 where 0 is unlimited.
This is typically 0 so the user can decide how
to handle new messages.

Prompt Message Sender Name

If you select YES, the system plays the user's
recorded name as the message sender or if
a recorded name is not available, the user's
extension number is played. If you select NO,
the user's extension number is played.

Change Password

Enable or disable the Change Password
prompt.

Record Personal Greeting

Enable or disable the Record Personal
Greeting prompt.

Set AWU

Enable or disable the Set AWU prompt.

Enable Welcome Message

The Enable Welcome Message option has
the following options:

Commissioning the Avaya Hospitality Messaging Server 400 database

108     Avaya Hospitality Messaging Server 400 Installation and Commissioning

March 2012

Comments? [email protected]

Summary of Contents for QuesCom 400





















































































































Reviews: