manualshive.com logo in svg

Avaya QuesCom 400, Installation And Commissioning Manual

Share
Download
Avaya QuesCom 400 Installation And Commissioning Manual Download Page 11

Chapter 3:  Installation preparation

Before you install the Avaya Hospitality Messaging Server 400 application, complete the checklists
provided in this chapter.

Navigation:

•

Site inspection checklist

 on page 11

•

Preinstallation checklist

 on page 12

•

Site preparation checklist

 on page 13

•

Enabling Log Me In remote access

 on page 13

Site inspection checklist

Complete the following site inspection checklist before you install the HMS 400 hardware to
ensure the installation site is ready for the hardware installation.

Table 1: Site inspection checklist

Check

Description

A water fire-retardant system is not in the chosen location. If a water
fire-retardant system is activated accidentally, it can severely damage
the server.

No heat sources are near the peripherals and ventilation.

The area is clean and clear of debris.

Adequate space is available for all equipment.

A desk, shelf, or table for the monitor, keyboard, mouse, and modem
and are available. Additional space is needed for a multi-server
environment.

An external analog phone line is available for the support modem. For
multi-server systems, one analog line and modem is required for each
server.

Enough power outlets for the server, monitor, and modem are
available. Additional power outlets are required for multi-server
systems.

Avaya Hospitality Messaging Server 400 Installation and Commissioning

March 2012     11

Summary of Contents for QuesCom 400





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands